Not Quite What I Imagined, But....

While looking for scarf patterns a few days ago, I came across a bunch that I wanted to make.  Once again, like the scarf I did a few days ago, I've tried to turn a knitted pattern into a sewing pattern.

It's not bad, right?  Even though it doesn't look like the inspiration scarf below, I am pleased with the way it turned out. 



Love it--the fabric, the design, the versatility!  The biggest problem was trying to figure out what fabric I could use to achieve the look.  While I would love to buy some awesome wool fabric, I need to start using the stash.  Decision, decisions!  I didn't have anything light and drapey that I could use as a single layer.  I decided to go with the lightweight Shao mist pink interlock that had been sitting in the stash since, well let's see.

Wow, this one is practically new! Barely over a year of sitting on my shelf.  (Did I mention that this would be my first attempt at working with knit fabric, too?)  I was hoping the interlock would achieve those nice, deep folds, but that didn't work out.  In retrospect, I think a narrower top section might have come closer to achieving that look.  Here's a quick look at how I came up with the pattern and put it together.

First, the knitting pattern gives no finished size.  There are a couple of diagrams like this one from the pdf:

I chose to interpret each of the jagged lines as an inch.  Now, I think the top section might work better if it was narrower by a couple of inches.  I'd also probably drop a couple of those slits.

This one required the dining room table for cutting.

It may look like isosceles triangle here with the two long sides being even, but it really drops 5 inches from one side to the other on the small end,  making the other two sides uneven as well.  I'd like to try making a larger drop from side to side next time. 

I chose to make buttonholes for the slits in the top.

I basted some light-weight interfacing where the buttonholes would be, serged the edges leaving a few inches open for turning, turned it out, top-stitched the edges, and spaced out six buttonholes at the top. Took out the interface basting and it was done!

Once I got over my initial disappointment that it is quite different from the inspiration piece, I started having fun with it.  The more I played with it, the more options I found for wearing it.

Taking a short break from scarf making to put together something special from an unusual fabric source.  Hope it will be ready to show you in a couple of days.

Perfect Weather for Making A Scarf

I'm in a scarf-making mood today. That may be the result of our temperatures.  This is the information for our area from weather.com.

Clifton Park, New York Weather

Observed at 3:45 pm EST

Wind Chill Warning Until 1:00 pm EST, Sunday February 14

0^{°F
Feels Like -20°F} 

                                                                    

 On the bright side, I now have this:

The inspiration came from this knitted scarf on Pinterest.  I dearly hate it when the ends of my scarves are continually falling forward.  No matter what method of wrapping them around I use, the damned things don't stay in place.  I like the idea here in the knitted one, but I don't knit.

My few forays into knitting were neither fun nor pretty.  I chose to attempt a sewn version.  I was a bit obsessed with getting the ends to look something like the knitted version which proved to be the hardest part for me.  In retrospect, simple rounded or squared ends would have been fine.

The rest of the project was quick and easy.  It's two long strips of flannel sewn leaving a couples of inches open for turning right-side out. The width was chosen from a scarf I own that I like.  I chose the length by wrapping it around and deciding where I wanted it to end on each side.  I also used this same method for deciding where I wanted to put the band that would serve as a fastener.

The yo-yo is on top of the band of fabric you pull other side of the scarf through.

I free-handed a piece for the PITA end, folded in half

 And voila!

If you have any artistic talent, coming up with a fancy shape for the end will be a cinch.  This took  me forever and was not worth the simple shape I ended up doing.  Next time, I'll trace something round and be done with it.  

To keep the bottom piece from lying flat (which did not look good), I made a pleat that is held in place by the yo-yo band.

You can see that in the photo below.  Both edges of the band catch the pleat to hold it in place.

And it matches my headband from a week or two ago!

I do love it when a sewing experiment goes well. 

 

Clover Wonder Clips vs. The Other Brand

I love my Clover wonder clips, but they are so expensive.  I decided to take a chance on the off brand and ordered a package of a hundred Urbest clips by iauto from Amazon for $9.99.  The lowest price for the same number of Clover brand clips would have  been $25.

No plastic box with Urbest Wonder Clips, but I never liked the box anyway. 

 Both sets are exactly the same size.

The plastic parts seem to be identical in shape, thickness, and quality. There is a difference in the metal piece in that the Urbest brand seems a little stiffer.  I think that translates to a need for slightly more pressure to open the clip.  If you really have a problem with your hands, they might not be a good buy for you. For me, this is not a problem at all.  The difference between opening the different clips is minimal. 

Both brands hold onto fabric well and open sufficiently to get around the number of layers needed for quilting and binding.  Since some reviewers said there were broken clips in their packs, I tested every single clip.  One of the clips was off kilter making it unusable.  The rest were fine.  For a savings of $15, I am glad I went with the cheaper brand. 

I like my new storage container, too. 

Prayer Kneeling Pad

Update:  Rather than a new separate post, I am posting about prototype #2--the more successful one here.  I was not happy with the give of the foam sold at Joann's even with the addition of the  heavyweight Pellon.  After Kyle left, I decided to try making one with an ordinary garden kneeling pad cut down to size.  Yes, he could drag along a plain garden kneeling but, but doesn't this look better?

The garden kneeling pad I used had a handle as in an oblong hole at one end.  I cut off the handle section making the pad about 16 inches long.  

Final consensus is that this one is the winner for several reasons. 

•  First, it is more comfortable to kneel on for an extended period of time.
•  Second,the all-round sizing works better.  The extra inch of width makes it easier to kneel on while the loss of length was not any problem at all.  The loss of depth makes it less cumbersome.
• Third, this is a tightly woven denim which works well for sewing and longevity.
• Last, it is lighter and easier to carry in his backpack.

As Pam mentioned in her comment, you could put some hardware on for a carrying strap.  I had mentioned that to Kyle, but he nixed it.  He will be tossing it in his bag and didn't see a need.  I almost wish I had gone ahead and done it with this new kneeler.  I think he would have found a removable strap to be handy at times--maybe even for hanging it up when not in use.

The minister son apparently gets stuck kneeling on hard surfaces for extended periods of time.  I don't know about you, but for me having a guy in the family ask you to sew something is highly unusual.  To encourage that, I got this done pretty quickly-- for me.

I like to refer to this color denim as minister black.  I don't know what Joann's calls it.

It is 15x10 inches which was just enough on the long side for him.  Do men have man-spread when they kneel??  Without having had him kneel down for measuring, I would not have known to make this 15 inches wide.  It just works for him.  Might try 16 inches the next one.

We had some foam cushions around to help choose the thickness (high density from Joann's).  He thought three inches was too much, but I would have wanted the three inches.  He choose the two inch thickness.  I added squares of the heavy-weight Pellon product used in bag-making over the top and bottom of the foam.  The Pellon is soft and gives a nice flat top.  I might add a layer of batting over the Pellon next time to soften the edges, though.

The fabric is a black denim from Joann's.  I used this on the advice of a store clerk and wish I had gone with the other heavyweight fabric with a tighter weave as I originally planned.  The edges of the denim unraveled like crazy without serging.

The two main squares of fabric were 16x11, and the zipper was long enough to go around the sides about a third of the way. I cut a three-inch strip for the side without the zipper and two-inch strips for each side of the zipper.  After sewing these two strips to the zipper, I cut that strip to three inches.

Look at that nice fold for hiding the zipper ends.  Remember to put on the no-zipper strip first.  Then it will be on top of the zipper says the person who did not do that and made some seam ripper work.

Zipped up, finished and ready for Kyle to take back to Minnesota on Saturday.  Oh, doesn't it feel good to finish a project?

The New Slippers

Apparently these slippers are quite popular with men in Mongolia.  My son Kyle knows his father's taste in clothing runs about as simple as possible.  Shirt, pants, shoes, belt--all in dull colors and he's set for the day. I only got him to wear a pull-over sweater a couple of years ago.  So, of course, these slippers are what Kyle brought back from Mongolia for his dad this week. Kyle also knows that no matter what he gives his dad it will be accepted graciously.  These slippers, however, truly were a test of that.   

Brian's been wearing them a lot since getting them.  I suspect he's hoping to wear them out fast. If these slippers are as good as the Mongolian socks Kyle brought back last year, Brian's slippers will be keeping our kids giggling for years to come. I'm just waiting for the day Brian forgets he's wearing them when he goes out to the mailbox. 

Sewing with Joann's Shopping Bag Fabric

Finally getting around to using this fabric purchased long, long ago.  As I said a few posts back, this is the same as the fabric that is now being called Oly Fun.  Here's my first reusable grocery bag from Joann's shopping bag fabric.

Straps are too long.  Will have to fix that.

I'm pretty sure my grocery bags are gonna be prettier than yours---and yes, I am bragging.  I used a ready-made shopping bag for  measurements.  That worked well except that I picked up the wrong bag to measure for handles.  These are a bit too long.

You have to press the bag to get sharp, easy-to-fold corners.  (Not too hot!  Fortunately it peeled off my ironing board and pressing cloth easily when experimenting last week.) Without pressing, it balloons out when open and doesn't fold well.

My bag before pressing--the pretty one--next to the ready made used as a pattern.

Once pressed, it is easy to fold back up for storage and seems to hold the creases well.

Nicely pressed and folded.

 I serged the seams although the fabric doesn't unravel. I think I'm still trying to justify my serger's existence for something other than sewing up the edges for fabric for prewashing.

Yes, those are nicely serged seams!

I like this stuff.  I know it will wear faster than other fabrics, but other fabrics don't stand up for easy filling at the grocery store like this does.  It cuts easily, sews easily, and is only $2.99 full price for a yard of 60 inch wide fabric. Then there are always those Joann's coupons for 40 or 50% off.  Can't beat that unless you have a mismatched set of bags with all kinds of company logos on the front--which is what I am presently using.  Looking forward to finishing a few more of these.

A Flapper Headband Success

I used FleeceFun.com's great FREE pattern to make this:

This one is the slim adult which I traced onto the fabric using that line as the cutting line--kind of between the regular flapper and the slim adult flapper headband sizes.  Slim looked like it might be too thin for me (cuz I get to keep all my prototypes, of course;-).  It probably would have been fine, but my version worked, too.  I chose top stitching rather than putting in piping, but may do piping on the next one.

Here is the back.

Since this was my first try and I was making it to fit me, I decided not to bother with a buttonhole.  I wrapped it around, tacked the spot where it fit, then sewed on a button.  Directions say you might want to put on a couple of buttonholes if it is for someone else to make sure it will fit.  I think I'd use velcro rather than having an extra buttonhole showing.  BUT you gotta have A button on there even without buttonholes cuz it looks so cool.

If you use a yo-yo flower as I did, you get to have matching buttons.  Fleece Fun has a link to directions for making a satin flower if you prefer something a little fancier.

The pattern was quick and easy.  Even with making the yo-yo and hand sewing the buttons, it was finished in less than an hour including getting the pattern ready.